2026-11-18 · Buyer Guide

Export Packaging and Container Loading for Radiators: A Buyer's Checklist

JIADELI Editorial Team

A steel panel radiator survives years of pressurized heating without complaint, yet a single rough forklift transfer can dent a corner beyond repair. In practice, most quality complaints importers receive arrive as transit damage: crushed cartons, scratched powder coating, bent brackets. That is why packaging specification deserves the same attention as heat output data when you issue a purchase order.

Start with the carton. For panel radiators, double-wall corrugated board with moulded corner protectors is the baseline; a poly bag inside the carton keeps condensation off the powder coating during ocean transit. Column and designer radiators, with their exposed welded feet and curved sections, need individual EPS end caps or foam wraps, not just one shared carton. Ask your supplier for photos of a packed unit from all six sides — a factory that packs well will have those photos ready.

Then decide between pallets and crates. Palletized cartons are the cost-efficient standard for volume panel programs, while fully enclosed plywood crates are worth the extra cost for high-value designer ranges, towel rails with glass or mirror accessories, and any route with multiple transshipments. Note that solid wood packaging requires ISPM 15 heat treatment and stamps, whereas plywood is exempt — one reason most exporters use plywood pallets and crates by default.

Container loading is where capacity is won or lost. As a rule of thumb, a 20ft container holds roughly 1,100 to 1,400 packed panel radiators of mixed sizes depending on the packing ratio, and a 40ft high-cube roughly 2,400 to 2,800. Ask for a loading plan that lists carton dimensions per model and the stacking layout per row. A serious factory can send this drawing before you confirm the order, and it tells you immediately whether the quoted price assumed realistic freight or optimistic fiction.

Moisture is the quiet enemy on long sea routes. Containers should be inspected for floor condition and roof leaks before loading, lined with kraft paper or container liners in humid seasons, and packed with desiccant bags per pallet. Steel radiators loaded into a damp container crossing the equator will show flash rust on uncoated brackets by arrival — preventable with a few dollars of desiccant per pallet.

Finally, align labels and documentation with your warehouse reality. Every carton should carry shipping marks, model, size and quantity, ideally with a barcode your team can scan at receiving. For mixed-SKU orders, insist on per-model separation within the container and a packing list that matches carton labels exactly — receiving 300 units of Type 22 when your list says Type 21 is a problem you want to avoid at the port, not solve by email afterward.

Before your first container, ask the supplier three questions: what is the standard packing construction per product family, can you provide a container loading plan for my order mix, and will you send loading photos before the doors are sealed? At Jia Deli, every radiator is leak-tested before packing, export cartons are specified per family, and loading photos are standard practice for OEM orders — because a radiator that arrives damaged is a warranty claim no one on either side wanted.

← Back to Blog